- Nouveau
Référence: MD000312
Marque: Mitsubishi Genuine OEM
Joint bouchon de vidange BV ou pont Lancer Evolution
Joint du bouchon de vidange pour la boite de vitesses ou les pont pour Lancer Evolution 4 à 10
Référence: MD000312
Marque: Mitsubishi Genuine OEM
Joint du bouchon de vidange pour la boite de vitesses ou les pont pour Lancer Evolution 4 à 10
Référence: 52009-AK005
Marque: HKS
Le filtre à huile HKS Hybrid TYPE1 permet une meilleur filtration de l'huile tout en gardant une pression d'huile optimum pour le moteur.Filtre à huile pour Nissan GTR R35, GT86/BRZ et Lancer Evolution
Référence: MD050317
Marque: Mitsubishi Genuine OEM
Joint du bouchon de vidange moteur pour Lancer Evolution de IV à X
Référence: MR212302
Marque: Mitsubishi Genuine OEM
Ecrou en cuivre M8 pour collecteur échappement Mitsubishi Lancer Evolution 3 à 9 Vendu à l'unité Pour la fixation du collecteur d'échappement il en faut 7
LINK - Terminated Engine Harness GM LS GEN3/4
Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engines supported it may require user modification for some applications, see Installation Manual or Contact Links Tech Support team to confirm suitability for your Engine.
PCLink start up MAPs available for both Gen3 and Gen4 LS (See below for download)
Engines Supported
Gen 3 LS1/LS6
Gen 4 LS2/LS3/LS7*
Compatible ECUs
G4X StormX (Cable Operated Throttle Body)
G4X XtremeX (Cable Operated and Drive-by-Wire Throttle Body)
See features tab and installation manual for further details.
*Notes for use with Gen 4 Engines
1. A cam sensor harness extension will be needed to accommodate the Gen 4 LS front mounted cam sensor.
2. A small modification is required to the crank sensor connector. See “crank connector” section in installation manual for details.
3. Injector Connector Adapters to USCar connector will be required for most Gen 4 Engines. Check your injector connector to confirm. Use Link PN 101-0287
4. To support Gen 4 factory knock sensors you will require the Link LS Gen 4 Knock Adapter Loom (PN 101-0306)
5. To support the factory Gen 4 MAP sensor you will require a Link LS Map Adapter Loom plus a Gen 3 to Gen 4 MAP sensor extension harness (alternatively you can use a Link MAP sensor which is directly supported by the harness)
Référence: 101-0193
Marque: LINK Engine Management
LINK - Adapter M10 x 1 Female to 1/8 NPT Male
Référence: 125-1000
Marque: LINK Engine Management
LINK - CAN Lambda - Digital Wideband CAN Module with Bosch LSU 4.9 Sensor
Référence: 101-0049
Marque: LINK Engine Management
LINK - Mounting Boss Aluminium (IATBMA)
Référence: 101-0271
Marque: LINK Engine Management
LINK - CAN Keypad Insert - Hazards
Référence: 101-0264
Marque: LINK Engine Management
LINK - CAN Keypad Insert - Traction Control Decrease
Référence: 208-4000
Marque: LINK Engine Management
LINK - G4+ TTLink - Audi Volkswagen ECU
Référence: 101-0100
Marque: LINK Engine Management
LINK - Throttle Position Sensor
Référence: 101-0008
Marque: LINK Engine Management
LINK - "A" Loom (5m) pour G4, G4+ et G4X ECUs
Référence: 219-4000
Marque: LINK Engine Management
LINK - ECU Plugin Mazda RX7 FD3S (S7-S8)
Référence: 101-0243
Marque: LINK Engine Management
LINK - CAN Keypad Insert - Green
Référence: 101-0348
Marque: LINK Engine Management
LINK - CAN Keypad Insert - Rear Spot Light
Référence: 100-0169
Marque: LINK Engine Management
LINK - MXS Strada 5" Dash - Race Edition
Référence: 101-0335
Marque: LINK Engine Management
LINK - CAN Keypad Encoder Insert - ABS 1
Référence: 202-4000
Marque: LINK Engine Management
LINK - ECU Plugin G4X Mitsubishi Evo 1-3
Référence: 101-0034
Marque: LINK Engine Management
LINK - Ethanol Content Sensor
Référence: 101-0212
Marque: LINK Engine Management
LINK - CAN Splitter Cable